Print

In this section you can find the technical data; for every further information, please feel free to contact us: we will help you find the ideal solution for your needs.

  • Working principle

    Load-penetration curve evaluation and tested algorythm

  • Preload

    continuous application and real time detection of load and indentation parameters

  • Load application method

    automatic with predetermined load value according to case depth

  • Minimum measurable diameter

    min 10mm
    bigger diameters depending on selected load

  • Storage

    high memory capacity according to the industrial PC in use

  • Languages

    english, german, italian, french, spanish + 1 other language on request

  • Power supply

    110-240 Vac 50/60 Hz

  • Working area dimensions

    stands capacity P 335 - H 315 mm

  • Weight

    440kg

  • Loads

    selecatble from 200kgf to 4000kgf
    test range from 0,4mm min to 2,5 / 2.7 mm of case depth

  • Load time

    test cycle depends on selected load - 120 seconds about without cutting the sample

  • Standard scales

    Reference HV scale

  • Reading

    direct reading of case depth on touchscreen display 8.4" - schematic curve with determined case depth value - statistics and curve comparison

  • Selectable functions

    load selection - language - calibration - hardness measure - case depth - hardness curve - schematic curve - reference - tolerances - penetrator type - sequence - file - scale - stats - print - histogram

  • Output interfaces

    USB - RS232 - Ethernet

  • Working conditions

    10°C-50°C

  • Dimensions

    90cm x 120cm x 85cm

  • Precision

    ±5%

In this section you will find the videos and pictures related to the selected product.

Foto

  • Placeholder photo imagePlaceholder photo image

     

  • Placeholder photo imagePlaceholder photo image

     

  • Placeholder photo imagePlaceholder photo image

     

  • Placeholder photo imagePlaceholder photo image

     

  • Placeholder photo imagePlaceholder photo image

    developement of various fixtures on customers request

In this section you will find our standard accessories as well as our optional accessories. Do you have the need for a specific solution you can't find here? Contact us, our technical office is at you disposal to suggest or develop the ideal solution for your needs.

Standard accessories

    • Vinyl protection cover

    • 600 HV test block for calibration

    • Test block with 0.75 mm hardened layer at 550 HV

    • Carbide indenter

    • Flat anvil 120mm dia.

    Optional accessories

    • Accessories image

      Special anvil on request

    • Accessories image

      V-anvil for rounds up to 200mm dia.

    • 400 HV test block for calibration

    • 800 HV test block for calibration

    • Test block with 0.25 mm hardened layer at 550 HV

    • Test block with 0.50 mm hardened layer at 550 HV

    • 3 pcs 120° hard metal indenter